Wednesday, July 20, 2011

Cal rescues Catalina

I went out on Prudence last week with extended family and had a great time. We were mostly there to show off the boat for the first time, have a bite in the cockpit and then decided we'd sneak in a quick motor around the harbor. We  went out to the mouth of the harbor thinking we'd do a quick run around the buoy a 1/4 mile offshore but decided to turn around when the bouncing got too out of control for the moms holding the kids/babies on the forward deck.
As we headed back into the harbor I saw a Catalina 25(?) drifting towards the rocks. As I kept an eye on it, I had a hard time knowing if the boat needed help or not. I couldn't really tell if the boat had no power but I did see that the sails were rolled up. I kept on heading in toward the main channel talking to my stepdad deciding whether to go over there and help or just call the coast guard and keep a safe distance. I decided to first motor over near him and see if indeed he needed help.
 As I started to head his way, I grabbed the handheld VHF and noticed that he was in trouble but made no panic signs. At one point he had one hand the on boat pulpit and was footing the boat off the rocks. I kept my distance as I have way less experience and control with my sailboat as I do with my fishing boat and didn't want to have two boats on the rocks. I yelled and asked if he needed assistance and he replied that he was ok. His boat clearly wasn't ok. I told him that I'd call the coast guard and he said not to worry about it.
At that point I thought that I could throw him a line and I would back us into the main channel. This took a few attempts as my step dad took the tiller and I threw the line. I never could get it to him as I had my step dad who has never been on this boat keep her some distance away. Strangely in my mind I contemplated trying to make a quick Monkey's Fist. No way. I then took control of the helm, backed upwind and let the wind drift the bow down closer to the boat in distress and we finally made the throw and pulled her to the channel.
What had happened was that the Catalina had caught a line around her outboard and lost power and control. Strangely her boom was broken and tied to the mast so she was basically a poor powerboat with a lot of windage. Her owner never seemed panic and never really wanted our help. He spent a couple minutes anchored and unwrapped the line from the prop as we watched to see that he got the outboard started.
 I think he may have waved a "thanks" and then motored off but here's another weird thing.
Instead of going straight into the harbor to take a break he motored quickly off toward the harbor mouth, threw down the anchor and began fishing. Wow. It was a strange event. After and even during really, I couldn't figure out if it was better for me to help him off the rocks or to call the Coast Guard. I was cautious getting near him as I had a boat full of family on board and it was a decision that I'm not entirely sure of even after the fact. I'd say now that I've done it I'd do it again as I have a little experience. I sure hope someone would help too if they saw me in that position. Mark one karma point down for Prudence. 

Tuesday, July 12, 2011

Dingy Rack Slider Pt. 2

Parker and I went down to Prudence last evening and finished off the dingy rack slider. It works great. There's not much I can do about the dingy width rubbing a little with the rack as I don't feel it's right for me to mess with the city's rack dimensions but...the rack is sliding the dingy so well. I spent very little money and am very pleased. Time will tell if I need to make any more mods.

This photo shows the basic setup and as you can tell, it's basic. 
I can either pull the dingy out of the rack and put it on a furniture dolly and roll it to where I can place in the water or better yet...
dingy rack

I can push it out the back of the rack and right into the water. With these 45ยบ elbows I can slide it pretty easily out of the water and back into the rack without it scraping on the side of the dock. 

rack elbows

I should probably cap the ends just to make it look a little more finished. I'm also playing with the idea of making a simple block and tackle retrieval line and will make it easier to pull it out. I"m not sure if that will even be needed as the dingy slides so well as it is. I'm calling this job DONE.

Monday, July 11, 2011

Cal 2-27 sailing progress

I'd really prefer to post with some photos but I sadly haven't taken any photos the last few times I've gone aboard.  My dad came down to the boat and we all went out sailing. He was a big big help in getting the sails trimmed and boat "sailing herself" and "in a groove" as he liked to say. He showed me that I had raised the main halyard enough and that was causing all sorts of issues that I couldn't solve with the other control lines. Easy. At the end of the day we were pointing much higher and keeping a course was a matter of moving my fingers rather then my whole are on the tiller...a balanced helm, what a feeling. I used the tiller extension for the first time and now I can't see sailing without it. I learned to use the traveller better and the jib sheet cars too. Dad helped me from getting underway to getting back in. He's teaches planned and methodical ways from start to finish. Thanks dad.

Friday, July 1, 2011

Dingy Rack Slider

Besides having a slip in a great location we also have a dingy rack on the dock right next to us with an older Seaworthy dingy and 5hp Mariner. The rack that the dingy sits on is made of 2x4's and is just too tight to easily slide the dingy in and out of. It's actually a big pain in the butt with the dingy always catching on the horizontal ribs. In order to make getting the dingy in and out of it's rack easier I have a plan of creating some pvc pipe slides. It should be easy but some road block always seem to pop up even on the easiest jobs. Photos to come. The idea is super simple. Add some 60" pvc pipes spaced 16" appart on top of the horizontal 2x4's. The pipes will be perpendicular to the 2x4's and parallel to the direction that the dingy get's slided. I will start with that simple upgrade first. I then may make additional sliders on top of those pipes consisting of larger diameter PVC and make a small plate connecting the two. The thought is that I'd then have a non corroding sliding plate to put the nose of the dingy on and then pick up the stern and slide the whole thing in and out. I'll hopefully have something to show this weekend.

Dear Prudence

It just had to be done.

Dear Prudence, won't you come out to play?
Dear Prudence, greet the brand new day
The sun is up, the sky is blue
It's beautiful and so are you
Dear Prudence, won't you come out to play?
Dear Prudence, open up your eyes
Dear Prudence, see the sunny skies
The wind is low, the birds will sing
That you are part of everything
Dear Prudence, won't you open up your eyes?
Look around round
Look around round round
Look around
Dear Prudence, let me see you smile
Dear Prudence, like a little child
The clouds will be a daisy chain
So let me see you smile again
Dear Prudence, won't you let me see you smile?
Dear Prudence, won't you come out to play?
Dear Prudence, greet the brand new day
The sun is up, the sky is blue
It's beautiful and so are you
Dear Prudence, won't you come out to play?